单选题 A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? ()
Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD
单选题 A customer has two Ethernet Switch Modules installed in an IBM BladeCenter Enterprise chassis. The modules were configured identically. The Ethernet module in bay one was inadvertenly reset to factory defaults. Which solution returns the module to the customer-specific configuration?()
Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface
Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
Back up the configuration of the Ethernet module in bay one and restore it to the Ethernet module in bay two using the AMM
Restore the configuration from NVRAM using the Switch Module Web interface
单选题 A customer is looking at an Oracle eBusiness solution. They would like to know what hardware they will need for the solution. They have some preliminary information from Oracle, including hardware requirements and specifics for their environment. Which of the following should be done next?()
Configure a 2 node x3950 X5
Customer needs a System p server to support Oracle applications
Download the Oracle eBusiness sizing questionnaire from IBM, fill out with customer and submit to IBM for System x sizing
Configure a system that meets the minimum requirements
单选题 A Customer has a proprietary server deployment solution that uses a combination of disk imaging and application pushing technology. They need to get a working Windows 2003 image for their new servers as soon as possible for deployment with their provisioning system. Which of the following methods can achieve this? ()
Install Windows 2003 using the F6 supply Mass Storage Controller option
Replace Customers deployment solution with Tivoli Provisioning Manager for OS Deployment Director Edition
Use ServerGuide to install Windows 2003
Deploy Customers existing image and use UXSPi to update IBM specific drivers
单选题 A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700. They would like to upgrade and plan for 40 TB capacity. The customer needs to move to a more scalable storage system to include all servers.Which of the following would be most appropriate to ask first?()
What are the plans for Disaster Recovery?
What are the plans for data migration?
Would iSCSI meet your needs?
How much space is available in the current storage systems?
单选题 retail company plans to consolidate 180 existing dual processor Xeon servers, all running a web server application on Windows Server 2003. They are planning consolidating to a single x3950 X5 running vSphere.Which of the following should be discussed with this customer? ()
Is the web content static or dynamic information
Consider two servers for redundancy and failover
What is the average CPU utilization of the existing web servers
Will the servers need a SCSI or Fibre Channel storage solution
单选题 A retail customer installs a BladeCenter into an existing 10/100 Ethernet network. Due to cost considerations, the customer uses Copper Pass-thru Modules. After installing this solution, the customer finds that they have no network connectivity. Which of the following at is causing the problem?()
Copper Pass-thru Modules only support 1000Mb line speeds.
Spanning Tree has been enabled on the Copper Pass-thru Module.
The customer does not have the latest firmware loaded on the Copper Pass-thru Module.
The customer is using LS21 Blades
单选题 What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?()
Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts
Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts
Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OK
Mount the IMM virtual disk
单选题 Which of the following is the correct procedure to update the BIOS on LS42 blades without using the AMM?()
Insert the Update eXpress Service Pack Installer (UXSPI) CD, boot the LS42 blade and follow the prompts
Boot the blade to the Bootable Media Creator (BoMC) CD and follow the prompts
Press F1 when the LS42 system is booting, select Update BIOS, insert the diskette into the diskette drive, and select OK
Use the Remote Supervisor Adapter virtual disk
单选题 A prospective customer has selected Fiber Channel (FC) for performance reasons. The prospect does not appear to understand the terminology and options of the fiber channel but is very interested in learning before investing money in this technology.What steps should be taken to make sure the customer is satisfied with the solution?()
Send customer links to documentation for the FC components included in the solution
Direct the customer to Red Books and White Papers on FC technologies
Work with business partner to include Lab Services engagement to setup FC environment and perform knowledge transfer
Switch to iSCSI
下列属于直线行驶的是()
某通信机房设置七氟丙烷预制灭火系统,该系统应有( )种启动方式。
唐后期书院产生的一个原因是受到()的影响。
压力损失是指()
干旱区造林,整地的主要目的是()
治癫证痰气郁结证,治以()
小学低、中年级的儿童____识记发展最为迅速。
( )是北京市制定的第一个全面保护历史文化名城的法规。
安全带的正确使用:使用前作外观检查,若破损应()使用。
Your network consists of a single Active Directory domain. The domain contains more than 300 group objects. The group objects are divided between several regional organizational units (OUs). You need to create a list of all groups that have names that begin with the word Sales. Which command should you use? ()